- Industrial quality, engineered for high volume capacity
- 24 VAC electrically actuated, 3-way solenoid
- Ultra-efficient valve with extremely low friction losses
- Selectable inlet/outlet configurations
The Mirage™ 300 Series valve is a component of Underhill’s “Total Solution” for the Mirage™ series product. This 3” valve is designed for high-volume flows while delivering very low-pressure losses. It is ideally suited for use with the M-160 sprinkler that can deliver upwards of 300 GPM with a flow loss of 1.5 Psi.
Selectable Inlet/Outlet Configurations
Can be ordered with wafer connection w/ bolts, female IPT threads or Victaulic connections inlet and outlet configurations to meet any number of piping configurations
24 VAC electrically actuated solenoid (normally closed only), that is compatible with most control systems including AC 2Wire control systems.
3-Way Selector Switch
Three-way selector switch allows the valve to be manually opened and closed while bypassing the electric solenoid. Helpful function during installation before controller is installed or if troubleshooting is ever needed.
Exceptional Flow/Friction Loss Characteristics
The sleeve valve design offers exceptionally low friction losses at high flow demands. 1.5 Psi at 300 GPM
Find out more about Underhill’s engineered Total Solution kits for the Mirage series product.
Ordering Information & Dimensions
|Mirage 300 Series Sleeve Valves|
|CV-3-F-WS||3” Sleeve Valve w/ 24 VAC electric solenoid, Wafer connection w/ bolts. Manual On/Off Control and Internal filter – (most commonly specified)||24 lbs.
|CV-3-T||3” Sleeve Valve w/ 24 VAC electric solenoid, NPT female threaded inlet/outlet. Manual On/Off Control and Internal Filter||26 lbs.
|CV-3-V-WS||3” Sleeve Valve w/ 24 VAC electric solenoid, Victaulic Connection, Manual On/Off Control and Internal filter||26 lbs.
|CV-2-F-WS||2" HDPE Sleeve valve w/ 24 VAC electric solenoid, Wafter conection w/o bolts. Manual On/Off Control and Internal filter||15 lbs.(6.80 Kg)|
|Valve Dimensions||3” model – Inlet / Outlet diameter 3” (7.6 cm)|
|Valve Lengths||Wafer Style – 7.3” (18.5 cm)
Thread Style – 9.8” (24.9 cm)
Victaulic Style – 10” (25.4 cm)
|Wafer-style Bolt Dimensions||4 (qty) 5/8” diameter x 11” long w/ 8 nuts|
|Valve Operation||Controlled by a rubber sleeve that is actuated by relief of hydraulic pressure. Relief can be via manual operation or electric actuation|
|3-way Manual Selector||Three settings, “Auto”, “Open” and “Close” Open and close functions bypass the electric solenoid|
|Solenoid||24 VAC electric-actuated|
|Solenoid to Base Connection||¾” 20 UNEF threaded connection|
|Solenoid wire lengths||16 gauge wire x 30” long x 2 leads (0.32 mm diameter x 80 cm long)|
|Inlet / Outlet Configurations||Wafer style w/ bolts, female IPT threads, Victaulic connection|
|Body Construction||Aluminum with molded impact plastic|
|External Tubing||¼” diameter tubing of various lengths|
|External Fittings||Metal, swivel compression fittings with male IPT threads|
|Needle Valve (optional)||Installed in external tubing to lower valve closing speed to prevent water hammer conditions|