EasyOut 2in1™

FIXED SPRAY HEAD / ROTOR REMOVAL AND
REPLACEMENT TOOL

Finally, a unique tool designed and engineered to help you do the job like never before….

Now one tool for both ½” inlet fixed spray heads with 2”, 3”, 4” 6” and 12”
pop-up bodies or ¾” inlet rotors.

Fits the following fixed spray head series with ½” threaded inlets:

*Incompatible with 570 series using ZXF internals. 
General Note: Will not work on some fixed spray heads if the side inlet is used.

Fits the following rotor series w/ a ¾” female inlet:

• Overview
• Features
• Ordering
• Resources
• Video
• Image Library

Overview

Fast and Easy Sprinkler Body Replacement Tool

• No Digging or Damage to Turf
• Saves Time and Money
• One tool will now work for both ½” inlet Fixed Spray heads and ¾
  inlet rotors.
• Excellent for Drip Conversion When Spray Head is No Longer Needed w/ ½” male fitting.

It’s as easy as 1-2-3-4

• Locate the sprinkler head and unscrew the top cap and remove the internal subassembly,
• Slide the telescoping rod down inside of the sprinkler body to reduce low-head drainage and dirt from falling back into the piping system,
• Insert the stepped EasyOut 2in1 tool into the interior of the sprinkler body,
• Use the supplied torque wrench to loosen the sprinkler body from the piping system and remove.

Future home of the NG400 Video

Underhill has an extensive library of product images available for use. 

Please contact Ken Newcomb for access to our image library:

This email address is being protected from spambots. You need JavaScript enabled to view it.

949.305.7050