EasyOut 2in1™
FIXED SPRAY HEAD / ROTOR REMOVAL AND REPLACEMENT TOOL
Raise or cap any sprinkler head in under 3 minutes without digging a hole.
Now one tool for both ½” inlet fixed spray heads with 2”, 3”, 4” 6” and 12” pop-up bodies or ¾” inlet rotors.
Fits the following fixed spray head series with ½” threaded inlets:
|
Toro
|
Rain Bird
|
Hunter
|
WeatherMatic
|
Hit Products
|
Irritrol
|
K-Rain
|
||||||
|
570 Series * |
1800 Series |
PS Ultra |
Max Spray Series |
700 Series |
I-Pro Series |
K-Sprays Series NP |
*Incompatible with 570 series using ZXF internals.
General Note: Will not work on some fixed spray heads if the side inlet is used.
Fits the following rotor series w/ a ¾” female inlet:
|
Toro
|
Rain Bird
|
Hunter
|
WeatherMatic
|
Irritrol
|
K-Rain
|
|||||
|
Mini 8 Series |
5000 & 5000 Plus Series |
Pro Series |
T3 Rotors |
430R Series |
RPS-50 Series |
Overview
Fast and Easy Sprinkler Body Replacement Tool
- No Digging or Damage to Turf
- Saves Time and Money
- One tool will now work for both ½” inlet Fixed Spray heads and ¾
inlet rotors. - Excellent for Drip Conversion When Spray Head is No Longer Needed w/ ½” male fitting.
It’s as easy as 1-2-3-4
- Locate the sprinkler head and unscrew the top cap and remove the internal subassembly,
- Slide the telescoping rod down inside of the sprinkler body to reduce low-head drainage and dirt from falling back into the piping system,
- Insert the stepped EasyOut 2in1 tool into the interior of the sprinkler body,
- Use the supplied torque wrench to loosen the sprinkler body from the piping system and remove.
Features
- Removes sprinkler in 3 minutes or less
- Optional ½” threaded plug when converting a fixed spray system to drip when the sprinkler head is no longer needed
- Small compact size enables these to be carried on maintenance trucks or in tool boxes
